Deep Hole Thread Milling
"Long reach application
cutters for small and large diameter size holes. Swarf problem
for deep threads eliminated in all materials. Programming control of cutting data enables
successful production."
Long reach thread milling cutters for small and large diameter size holes.
|
|
Thread Milling Deep HolesThread milling deep holes with T-TECH multi-fluted solid carbide cutters, is an ideal choice for both soft and demanding materials. The process eliminates swarf crowding which often results in ripped threads and broken taps. Excellent surface texture and finish is achievable. Unlike tapping you control the speed, feed and cut, keeping the cutter in one piece. We will advise on your application, providing programming assistance where required. T-TECH deep hole cutters offer less resistance, producing lower cutting forces. This allows deeper threads to be produced before push-off occurs. Cutters are manufactured in sub-micro grain, 10%Co carbide. Surface coatings available. Standard range deep hole thread milling cutters offer the following: -
Special deep hole thread milling cutters in short delivery times
|
Thread Milling 
| Tool Code | Thread Size | D1 | D2 | D3 | L1 | L2 | L3 |
|---|---|---|---|---|---|---|---|
| CTM-3006MM-3D | M3 x 0.50 | 2.30 | 1.40 | 4.00 | 1.50 | 10.00 | 55 |
| CTM-3506MM-3D* | M3.5 x 0.60 | 2.60 | 1.60 | 4.00 | 1.80 | 11.70 | 55 |
| CTM-4007MM-3D | M4 x 0.70 | 2.90 | 1.75 | 4.00 | 2.10 | 13.40 | 55 |
| CTM-4575MM-3D* | M4.5 x 0.75 | 3.30 | 2.10 | 4.00 | 2.25 | 15.00 | 55 |
| CTM-5008MM-3D | M5 x 0.80 | 3.80 | 2.40 | 4.00 | 2.40 | 16.60 | 55 |
| CTM-6010MM-3D | M6 x 1.00 | 4.50 | 2.75 | 6.00 | 3.00 | 20.00 | 60 |
| CTM-8125MM-3D | M8 x 1.25 | 6.00 | 3.90 | 6.00 | 3.75 | 26.25 | 65 |
| CTM-1015MM-3D | M10 x 1.50 | 7.80 | 5.20 | 8.00 | 4.50 | 33.00 | 75 |
| CTM-2175MM-3D | M12 x 1.75 | 9.50 | 6.50 | 10.00 | 5.25 | 39.50 | 80 |
| CTM-1420MM-3D | M14 x 2.00 | 11.00 | 7.50 | 12.00 | 6.00 | 46.00 | 100 |
| CTM-1620MM-3D | M16 x 2.00 | 12.00 | 8.50 | 12.00 | 6.00 | 52.00 | 100 |
All cutters with 10.0 and 12.0 diameter shanks have internal coolant feed.
| Tool Code | Thread Size | D1 | D2 | D3 | L1 | L2 | L3 |
|---|---|---|---|---|---|---|---|
| CTM-5005MM-3D* | M5 x 0.50 | 4.00 | 3.00 | 4.00 | 1.50 | 16.00 | 55 |
| CTM-6075MM-3D* | M6 x 0.75 | 4.50 | 3.25 | 6.00 | 2.25 | 19.50 | 60 |
| CTM-8010MM-3D | M8 x 1.00 | 6.00 | 4.20 | 6.00 | 3.00 | 26.00 | 65 |
| CTM-1125MM-3D | M10 x 1.25 | 8.00 | 5.50 | 8.00 | 3.75 | 32.50 | 75 |
| CTM-2125MM-3D | M12 x 1.25 | 9.70 | 7.50 | 10.00 | 3.75 | 38.50 | 80 |
| CTM-1415MM-3D | M14 x 1.50 | 10.00 | 7.00 | 10.00 | 4.50 | 45.00 | 80 |
| CTM-1615MM-3D | M16 x 1.50 | 12.00 | 9.00 | 12.00 | 4.50 | 51.00 | 80 |
All cutters with 10.0 and 12.0 diameter shanks have internal coolant feed.
| Tool Code | Thread Size | D1 | D2 | D3 | L1 | L2 | L3 |
|---|---|---|---|---|---|---|---|
| CTM-0640UN-3D* | #6-40 UNF | 2.40 | 1.40 | 4.00 | 1.905 | 12.30 | 55 |
| CTM-0836UN-3D* | #8-36 UNF | 3.00 | 1.90 | 4.00 | 2.117 | 14.40 | 55 |
| CTM-1032UN-3D | #10-32 UNF | 3.50 | 2.25 | 4.00 | 2.381 | 16.60 | 55 |
| CTM-1428UN-3D | 1/4"-28 UNF | 4.80 | 3.25 | 6.00 | 2.721 | 20.80 | 60 |
| CTM-3124UN-3D | 5/16"-24 UNF | 5.50 | 3.50 | 6.00 | 3.175 | 26.10 | 65 |
| CTM-3824UN-3D | 3/8"-24 UNF | 7.50 | 5.50 | 8.00 | 3.175 | 31.10 | 75 |
| CTM-1220UN-3D | 1/2"-20 UNF | 8.00 | 5.70 | 8.00 | 3.810 | 40.50 | 80 |
| CTM-5818UN-3D | 5/8"-18 UNF | 10.00 | 7.50 | 10.00 | 4.234 | 50.80 | 90 |
All cutters with 10.0 and 12.0 diameter shanks have internal coolant feed.
| Tool Code | Thread Size | D1 | D2 | D3 | L1 | L2 | L3 |
|---|---|---|---|---|---|---|---|
| CTM-0632UN-3D | #6-32 UNC | 2.30 | 1.10 | 4.00 | 2.381 | 12.60 | 55 |
| CTM-0832UN-3D | #8-32 UNC | 3.00 | 1.75 | 4.00 | 2.381 | 14.60 | 55 |
| CTM-1024UN-3D | #10-24 UNC | 3.20 | 1.60 | 4.00 | 3.175 | 17.10 | 55 |
| CTM-1224UN-3D* | #12-24 UNC | 3.80 | 2.20 | 6.00 | 3.175 | 19.10 | 60 |
| CTM-1420UN-3D | 1/4"-20 UNC | 4.40 | 2.50 | 6.00 | 3.810 | 21.50 | 60 |
| CTM-3118UN-3D | 5/16"-18 UNC | 5.80 | 3.50 | 6.00 | 4.234 | 26.80 | 65 |
| CTM-3816UN-3D | 3/8"-16 UNC | 7.20 | 5.00 | 8.00 | 4.763 | 31.20 | 75 |
| CTM-4314UN-3D | 7/16"-14 UNC | 8.00 | 5.00 | 8.00 | 5.443 | 37.60 | 75 |
| CTM-1213UN-3D | 1/2"-13 UNC | 9.50 | 6.50 | 10.00 | 5.861 | 41.90 | 90 |
| CTM-5811UN-3D | 5/8"-11 UNC | 12.00 | 8.00 | 12.00 | 6.927 | 52.60 | 100 |
All cutters with 10.0 and 12.0 diameter shanks have internal coolant feed.
*Items are not available from stock, made to order only, typical delivery 4 working days.
